UC206 is a Insert Bearing (with Setscrew), commonly used in power transmission systems, featuring self-aligning capability to accommodate minor shaft misalignment.

1. Detailed Dimensional Specifications

Parameter	Value
Bore Diameter (d)	30 mm
Outside Diameter (D)	62 mm
Overall Width (B)	38.1 mm (including housing)
Inner Ring Width	16 mm (bearing only)
Setscrew Thread Size	M8
Mounting Hole PCD	50 mm
Weight	Approx. 0.3 kg

2. Load Ratings

Dynamic Load Rating (C):12.8 kN
Static Load Rating (C₀):6.55 kN
Speed Limit (Grease Lubrication):7000 rpm
Self-Aligning Angle:±2° (compensates for minor misalignment)

UC206 Bearing Applications

Due to its self-aligning feature and easy installation, UC206 is widely used in:

Agricultural Machinery
- Tractors, harvesters, seeders, etc.
Conveying Equipment
- Belt conveyors, chain conveyors.
Fans & Pumps
- Medium-low speed applications with light-to-moderate loads.
Food Processing Machinery
- Mixers, conveyors (requires dust-proof & easy maintenance).
Textile Machinery
- Transmission components requiring self-alignment.

Key Advantages of UC206 Bearing

Self-Aligning Capability
- Tolerates ±2° misalignment, reducing wear caused by shaft deflection.
Easy Installation
- Setscrew (M8) fixation eliminates the need for additional locking devices.
Enhanced Sealing
- Typically equipped with rubber seals (RS/2RS) for dust/contaminant protection.
Low Maintenance
- Unitized design simplifies replacement and reduces downtime.
Versatile Performance
- Suitable for low-to-medium speed and load across industrial & agricultural applications.

Selection Guidelines

Higher Load Capacity: Consider UC207 (35mm bore) or UC308 (40mm bore).
Higher Speed Requirements: Opt for deep groove ball bearings (e.g., 6206).
Corrosive Environments: Choose stainless steel (UC206-SS) or coated variants.

Inquiry Cart 0