Ningbo Kent Bearing Co., Ltd
Ningbo Kent Bearing Co., Ltd
Add to Cart
P6 High Precision Ball Bearing For High Speed Motors:
These types of ball bearing can be used in numerical control machine tool, automobile industry, precise instrument, high-speed machine tool, arospace, etc. It is simple in design, non-separated, suitable for high speed, reliable in operation and low in maintenance cost.
Corrosion Resistance:
The primary advantage of stainless steel bearings is their excellent resistance to corrosion. Unlike standard carbon steel bearings, stainless steel bearings can withstand exposure to water, chemicals, and other corrosive substances, making them suitable for use in wet or chemically aggressive environments.
High Strength and Durability:
Stainless steel bearings are made from robust materials such as 440C or 316 stainless steel, which provide high mechanical strength and resistance to wear. This ensures a longer service life, even under heavy loads or high-speed operations.
Hygienic Properties:
Stainless steel is non-porous and easy to clean, making these bearings ideal for applications in the food, beverage, and pharmaceutical industries, where hygiene and contamination prevention are critical.
Temperature Resistance:
Stainless steel bearings can operate effectively in a wide temperature range, from cryogenic conditions to high-temperature environments, without losing their structural integrity or performance.
Low Maintenance:
Due to their corrosion resistance and durability, stainless steel bearings require less maintenance compared to standard bearings, reducing downtime and operational costs.
Non-Magnetic Properties:
Certain stainless steel alloys (e.g., 316) are non-magnetic, making these bearings suitable for applications in medical devices, electronics, and other industries where magnetic interference must be avoided.
Load Capacity: Stainless steel bearings can handle both radial and axial loads, though their load capacity may be slightly lower than that of carbon steel bearings due to the material's hardness. However, they are still suitable for moderate to heavy loads in many applications.
Speed Capability: These bearings perform well in high-speed applications, thanks to their smooth surface finish and ability to maintain stability under rotational stress.
Lubrication Compatibility: Stainless steel bearings can be used with a variety of lubricants, including food-grade and high-temperature lubricants, to enhance their performance in specific environments.
Clean Operation: Their resistance to rust and contamination ensures clean operation, which is essential in industries like food processing and medical equipment manufacturing.
Technical Parameters:
| Basic | Bore d | Outer Diameter D | Width W | Radius r | Basic Load | Maximum Run | Weight | ||||||
| Dynamic | Static | Grease | Oil | ||||||||||
| mm | inch | mm | inch | mm | inch | mm | inch | C | CO | r/min | r/min | ||
| 604 | 4 | 0.1575 | 12 | 0.4724 | 4 | 0.1575 | 0.2 | 0.008 | 0.97 | 0.36 | 43000 | 51000 | 0.002 |
| 605 | 5 | 0.1969 | 14 | 0.5512 | 5 | 0.1969 | 0.2 | 0.008 | 1.33 | 0.505 | 39000 | 46000 | 0.0035 |
| 606 | 6 | 0.2362 | 17 | 0.6693 | 6 | 0.2362 | 0.3 | 0.012 | 2.24 | 0.91 | 28000 | 36000 | 0.008 |
| 607 | 7 | 0.2756 | 19 | 0.7480 | 6 | 0.2362 | 0.3 | 0.012 | 2.24 | 0.91 | 28000 | 36000 | 0.008 |
| 608 | 8 | 0.3149 | 22 | 0.8661 | 7 | 0.2756 | 0.3 | 0.012 | 3.35 | 1.4 | 26000 | 34000 | 0.012 |
| 609 | 9 | 0.3543 | 24 | 0.9449 | 7 | 0.2756 | 0.3 | 0.012 | 3.4 | 1.45 | 22000 | 30000 | 0.014 |
| 6000 | 10 | 0.3937 | 26 | 1.0236 | 8 | 0.3150 | 0.3 | 0.012 | 4.55 | 1.96 | 20000 | 28000 | 0.019 |
| 6001 | 12 | 0.4724 | 28 | 1.1024 | 8 | 0.3150 | 0.3 | 0.012 | 5.1 | 2.39 | 19000 | 26000 | 0.021 |
| 6002 | 15 | 0.5906 | 32 | 1.2598 | 9 | 0.3543 | 0.3 | 0.012 | 5.6 | 2.84 | 18000 | 24000 | 0.03 |
| 6003 | 17 | 0.6693 | 35 | 1.3780 | 10 | 0.3937 | 0.3 | 0.012 | 6.8 | 3.35 | 17000 | 22000 | 0.039 |
| 6004 | 20 | 0.7874 | 42 | 1.6535 | 12 | 0.4724 | 0.6 | 0.024 | 9.4 | 5.05 | 15000 | 19000 | 0.069 |
| 6005 | 25 | 0.9843 | 47 | 1.8504 | 12 | 0.4724 | 0.6 | 0.024 | 10.1 | 5.85 | 13000 | 17000 | 0.08 |
| 6006 | 30 | 1.1811 | 55 | 2.1654 | 13 | 0.5118 | 1.0 | 0.039 | 13.2 | 8.3 | 12000 | 15000 | 0.116 |
| 6007 | 35 | 1.3780 | 62 | 2.4409 | 14 | 0.5512 | 1.0 | 0.039 | 16 | 10.3 | 10000 | 13000 | 0.155 |
| 6008 | 40 | 1.5748 | 68 | 2.6772 | 15 | 0.5906 | 1.0 | 0.039 | 16.8 | 11.5 | 8000 | 11000 | 0.185 |
| 6009 | 45 | 1.7717 | 75 | 2.9528 | 16 | 0.6299 | 1.0 | 0.039 | 21 | 15.1 | 7200 | 9000 | 0.231 |
| 6010 | 50 | 1.9685 | 80 | 3.1496 | 16 | 0.6299 | 1.0 | 0.039 | 21.8 | 16.6 | 6400 | 7800 | 0.25 |
| 6011 | 55 | 2.1654 | 90 | 3.5433 | 18 | 0.7087 | 1.1 | 0.043 | 28.3 | 21.2 | 5700 | 7000 | 0.362 |
| 6012 | 60 | 2.3622 | 95 | 3.7402 | 18 | 0.7087 | 1.1 | 0.043 | 29.5 | 23.2 | 5000 | 6300 | 0.385 |
| 6013 | 65 | 2.9551 | 100 | 3.9370 | 18 | 0.7087 | 1.1 | 0.043 | 31.9 | 25 | 4800 | 6100 | 0.44 |
| 6014 | 70 | 2.7559 | 110 | 4.3307 | 20 | 0.7874 | 1.1 | 0.043 | 39.7 | 31 | 4600 | 5800 | 0.6 |
| 6015 | 75 | 2.9528 | 115 | 4.5276 | 20 | 0.7874 | 1.1 | 0.043 | 41.6 | 33.5 | 4400 | 5600 | 0.64 |
| Basic Bearing | Bore d | Outer Diameter D | Width W | Radius r | Basic Load Rating KN | Maximum Run out Speed | Weight | ||||||
| mm | inch | mm | inch | mm | inch | mm | inch | Dynamic | Static | Grease | Oil | ||
| C | CO | r/min | r/min | ||||||||||
| 627 | 7 | 0.2756 | 22 | 0.8661 | 7 | 0.2756 | 0.3 | 0.012 | 3.35 | 1.4 | 26000 | 34000 | 0.013 |
| 628 | 8 | 0.3149 | 24 | 0.9448 | 8 | 0.3149 | 0.3 | 0.012 | 4 | 1.59 | 24000 | 32000 | 0.017 |
| 629 | 9 | 0.3543 | 26 | 1.0236 | 8 | 0.3149 | 0.3 | 0.012 | 4.55 | 1.96 | 22000 | 30000 | 0.02 |
| 6200 | 10 | 0.3937 | 30 | 1.1811 | 9 | 0.3543 | 0.6 | 0.024 | 5.1 | 2.39 | 19000 | 26000 | 0.032 |
| 6201 | 12 | 0.4724 | 32 | 1.2598 | 10 | 0.3937 | 0.6 | 0.024 | 6.1 | 2.75 | 18000 | 24000 | 0.037 |
| 6202 | 15 | 0.5906 | 35 | 1.3780 | 11 | 0.4331 | 0.6 | 0.024 | 7.75 | 3.6 | 17000 | 22000 | 0.045 |
| 6203 | 17 | 0.6693 | 40 | 1.5748 | 12 | 0.4724 | 0.6 | 0.024 | 9.6 | 4.6 | 16000 | 20000 | 0.066 |
| 6204 | 20 | 0.7874 | 47 | 1.8504 | 14 | 0.5512 | 1.0 | 0.039 | 12.8 | 6.65 | 14000 | 18000 | 0.106 |
| 6205 | 25 | 0.9843 | 52 | 2.0470 | 15 | 0.5906 | 1.0 | 0.039 | 14 | 7.85 | 12000 | 16000 | 0.128 |
| 6206 | 30 | 1.1811 | 62 | 2.4409 | 16 | 0.6299 | 1.0 | 0.039 | 19.5 | 11.3 | 10000 | 13000 | 0.199 |
| 6207 | 35 | 1.3780 | 72 | 2.8346 | 17 | 0.6693 | 1.1 | 0.043 | 25.7 | 15.3 | 8800 | 10000 | 0.287 |
| 6208 | 40 | 1.5748 | 80 | 3.1496 | 18 | 0.7087 | 1.1 | 0.043 | 29.1 | 17.8 | 7700 | 9200 | 0.367 |
| 6209 | 45 | 1.7717 | 85 | 3.3465 | 19 | 0.7480 | 1.1 | 0.043 | 32.5 | 20.4 | 6800 | 8200 | 0.416 |
| 6210 | 50 | 1.9685 | 90 | 3.5433 | 20 | 0.7874 | 1.1 | 0.043 | 35 | 23.2 | 6100 | 7300 | 0.462 |
| 6211 | 55 | 2.1654 | 100 | 3.9370 | 21 | 0.8268 | 1.5 | 0.059 | 43.5 | 29.2 | 5500 | 6600 | 0.602 |
| 6212 | 60 | 2.3622 | 110 | 4.3307 | 22 | 0.8661 | 1.5 | 0.059 | 52.5 | 36 | 5000 | 6000 | 0.789 |
| 6213 | 65 | 2.5591 | 120 | 4.7244 | 23 | 0.9055 | 1.5 | 0.059 | 58.5 | 40.5 | 4800 | 5800 | 0.99 |
| 6214 | 70 | 2.7559 | 125 | 4.9213 | 24 | 0.9449 | 1.5 | 0.059 | 63.7 | 45 | 4600 | 5600 | 1.1 |
| 6215 | 75 | 2.9528 | 130 | 5.1181 | 25 | 0.9843 | 1.5 | 0.059 | 68.9 | 49 | 4400 | 5400 | 1.2 |
ABEC-5 Tolerance Class ABEC-5 (P5)
| Inner Ring | Tolerance in um/s | |||||||||||
| d mm | Δdmp | Vdp²)Diameter Series | Vdmp | Kia | Sd | Sis3) | ΔBs | Vbs | ||||
| 9 | 0,1,2,3,4 | |||||||||||
| over | including | high | low | max | 3 | max | max | max | High | Low | max | |
| 1)0.6 | 2.5 | 0 | -5 | 5 | 4 | 3 | 4 | 7 | 7 | 0 | -40 | 5 |
| 2.5 | 10 | 0 | -5 | 5 | 4 | 3 | 4 | 7 | 7 | 0 | -40 | 5 |
| 10 | 18 | 0 | -5 | 5 | 4 | 3 | 4 | 7 | 7 | 0 | -80 | 5 |
| 18 | 30 | 0 | -6 | 6 | 5 | 3 | 4 | 8 | 8 | 0 | -120 | 5 |
| 30 | 50 | 0 | -8 | 8 | 6 | 4 | 5 | 8 | 8 | 0 | -120 | 5 |
| 50 | 80 | 0 | -9 | 9 | 7 | 5 | 5 | 8 | 8 | 0 | -150 | 6 |
| Outer Ring | Tolerance in um/s | |||||||||||
| D mm | Δdmp | Vdp²)Diameter Series | Vdmp | Kia | SD4) SD15) | Sea4)5) | ΔBs | Vbs | ||||
| 9 | 0,1,2,3,4 | |||||||||||
| over | including | high | low | max | max | max | max | High | Low | max | ||
| 1)2.5 | 6 | 0 | -5 | 5 | 4 | 3 | 5 | 8 | 8 | 5 | ||
| 6 | 18 | 0 | -5 | 5 | 4 | 3 | 5 | 8 | 8 | 5 | ||
| 18 | 30 | 0 | -6 | 6 | 5 | 3 | 6 | 8 | 8 | 5 | ||
| 30 | 50 | 0 | -7 | 7 | 5 | 4 | 7 | 8 | 8 | 5 | ||
| 50 | 80 | 0 | -9 | 9 | 7 | 5 | 8 | 8 | 10 | 6 | ||
| 80 | 120 | 0 | -10 | 10 | 8 | 5 | 10 | 9 | 11 | 8 | ||
| 120 | 150 | 0 | -11 | 11 | 8 | 6 | 11 | 10 | 13 | 8 | ||
ABEC-7 Tolerance Class ABEC-7 (P4)
| Inner Ring | Tolerance in um/s | ||||||||||||||
| d mm | Δdmp | Δds | Vdp²)Diameter Series | Vdmp | Kia | Sd | Sia | ΔBs | Vbs | ||||||
| 7,8,9 | 1,7,2,3,4 | ||||||||||||||
| over | including | high | low | high | low | max | max | max | max | max | High | low | Low | max | |
| 1)0.6 | 2.5 | 0 | -4 | 0 | -4 | 4 | 3 | 2 | 2.5 | 3 | 3 | 0 | -40 | -40 | 2.5 |
| 2.5 | 10 | 0 | -4 | 0 | -4 | 4 | 3 | 2 | 2.5 | 3 | 3 | 0 | -40 | -40 | 2.5 |
| 10 | 18 | 0 | -4 | 0 | -4 | 4 | 3 | 2 | 2.5 | 3 | 3 | 0 | -80 | -80 | 2.5 |
| 18 | 30 | 0 | -5 | 0 | -5 | 5 | 4 | 2.5 | 3 | 4 | 4 | 0 | -120 | -120 | 2.5 |
| 30 | 50 | 0 | -6 | 0 | -5 | 6 | 4 | 3 | 4 | 4 | 4 | 0 | -120 | -120 | 3 |
| 50 | 80 | 0 | -7 | 0 | -5 | 7 | 5 | 3.5 | 4 | 5 | 5 | 0 | -150 | -150 | 4 |
| Outer Ring | Tolerance in um/s | ||||||||||||||
| D mm | Δdmp | Δds | Vdp²)Diameter Series | Vdmp | Kia | Sd | Sia | ΔBs | Vbs | ||||||
| 7,8,9 | 1,7,2,3,4 | ||||||||||||||
| over | including | high | low | high | low | max | max | max | max | max | High | low | max | ||
| 1)2.5 | 6 | 0 | -4 | 0 | -4 | 4 | 3 | 2 | 3 | 4 | 5 | Identical to ΔBs and VBs of inner ring of same bearing | 2.5 | ||
| 6 | 18 | 0 | -4 | 0 | -4 | 4 | 3 | 2 | 3 | 4 | 5 | 2.5 | |||
| 18 | 30 | 0 | -5 | 0 | -5 | 5 | 4 | 2.5 | 4 | 4 | 5 | 2.5 | |||
| 30 | 50 | 0 | -6 | 0 | -6 | 6 | 5 | 3 | 5 | 4 | 5 | 2.5 | |||
| 50 | 80 | 0 | -7 | 0 | -7 | 7 | 5 | 3.5 | 5 | 4 | 5 | 3 | |||
| 80 | 120 | 0 | -8 | 0 | -8 | 8 | 6 | 4 | 6 | 5 | 6 | 4 | |||
| 120 | 150 | 0 | -9 | 0 | -9 | 9 | 7 | 5 | 7 | 5 | 7 | 5 | |||
Application Senarios of High Precision Hall Bearings
Customization Welcomed:
We can printing your brand (logo,artwork)on the shield or laser engraving your brand on the shield.
We can custom your packaging according to your design.
All copyright owned by clients and we promised don't disclose any information.
Packing and Shipping:
The deep groove ball bearings will be securely packaged individually, or tube packing or packed as customization packing
Shipping method is negotiable.
FAQ:
1.Q:Are you a factory or trading company?
A:Kent Bearing is specialized in manufacturing and exporting bearings, and we have our own factory and warehouse.
2.Q:Can I get some samples and do you offer free samples?
A:Yes, sure, Kent Bearing are honored to offer you samples.
3.Q: How about the shipping?
A: We can arrange the shipment or you may have the forwarder.
4.Q: Could you tell me the material of our bearing?
A: We have chrome steel, and stainless steel, ceramic and plastic material
5.Q: Can we get support if we have our own market position?
A: Please inform us detailed information about your market,we will discuss
and propose helpful suggestion for you and to find the best solution for you.