6001RS Ball Bearing, Double Rubber Sealed Deep Groove Bearings 12x28x8mm, High Temperature High Speed Low Noise
Product Description:
- Bearing Number: 6001RS
- Material: Kent Ball Bearing is made of premium bearing steel not carbon steel. High speed operation, high temperature resistance, low noise and smooth rotation. These brand new bearings come directly from our factory and fully tested.
- Widely Application: Motors, power tools, automobile, household appliances and others.
- Excellent Performance : Precise and versatile, performing well in noise and vibration detection. Pre-lubricated with grease, less friction, no maintenance needed.
- Satisfaction Customer Service: If you're unsatisfied or have an issue with this bearing, please feel free to contact us, we will offer you a satisfactory solution!
Technical Parameters of 6000 Series Deep Groove Ball Bearing:
| Basic
Bearing
No. | Bore d | Outer Diameter D | Width W | Radius r | Basic Load
Rating KN | Maximum Run
out Speed | Weight
Kg/pc |
| Dynamic | Static | Grease | Oil |
| mm | inch | mm | inch | mm | inch | mm | inch | C | CO | r/min | r/min |
| 604 | 4 | 0.1575 | 12 | 0.4724 | 4 | 0.1575 | 0.2 | 0.008 | 0.97 | 0.36 | 43000 | 51000 | 0.002 |
| 605 | 5 | 0.1969 | 14 | 0.5512 | 5 | 0.1969 | 0.2 | 0.008 | 1.33 | 0.505 | 39000 | 46000 | 0.0035 |
| 606 | 6 | 0.2362 | 17 | 0.6693 | 6 | 0.2362 | 0.3 | 0.012 | 2.24 | 0.91 | 28000 | 36000 | 0.008 |
| 607 | 7 | 0.2756 | 19 | 0.7480 | 6 | 0.2362 | 0.3 | 0.012 | 2.24 | 0.91 | 28000 | 36000 | 0.008 |
| 608 | 8 | 0.3149 | 22 | 0.8661 | 7 | 0.2756 | 0.3 | 0.012 | 3.35 | 1.4 | 26000 | 34000 | 0.012 |
| 609 | 9 | 0.3543 | 24 | 0.9449 | 7 | 0.2756 | 0.3 | 0.012 | 3.4 | 1.45 | 22000 | 30000 | 0.014 |
| 6000 | 10 | 0.3937 | 26 | 1.0236 | 8 | 0.3150 | 0.3 | 0.012 | 4.55 | 1.96 | 20000 | 28000 | 0.019 |
| 6001 | 12 | 0.4724 | 28 | 1.1024 | 8 | 0.3150 | 0.3 | 0.012 | 5.1 | 2.39 | 19000 | 26000 | 0.021 |
| 6002 | 15 | 0.5906 | 32 | 1.2598 | 9 | 0.3543 | 0.3 | 0.012 | 5.6 | 2.84 | 18000 | 24000 | 0.03 |
| 6003 | 17 | 0.6693 | 35 | 1.3780 | 10 | 0.3937 | 0.3 | 0.012 | 6.8 | 3.35 | 17000 | 22000 | 0.039 |
| 6004 | 20 | 0.7874 | 42 | 1.6535 | 12 | 0.4724 | 0.6 | 0.024 | 9.4 | 5.05 | 15000 | 19000 | 0.069 |
| 6005 | 25 | 0.9843 | 47 | 1.8504 | 12 | 0.4724 | 0.6 | 0.024 | 10.1 | 5.85 | 13000 | 17000 | 0.08 |
| 6006 | 30 | 1.1811 | 55 | 2.1654 | 13 | 0.5118 | 1.0 | 0.039 | 13.2 | 8.3 | 12000 | 15000 | 0.116 |
| 6007 | 35 | 1.3780 | 62 | 2.4409 | 14 | 0.5512 | 1.0 | 0.039 | 16 | 10.3 | 10000 | 13000 | 0.155 |
| 6008 | 40 | 1.5748 | 68 | 2.6772 | 15 | 0.5906 | 1.0 | 0.039 | 16.8 | 11.5 | 8000 | 11000 | 0.185 |
| 6009 | 45 | 1.7717 | 75 | 2.9528 | 16 | 0.6299 | 1.0 | 0.039 | 21 | 15.1 | 7200 | 9000 | 0.231 |
| 6010 | 50 | 1.9685 | 80 | 3.1496 | 16 | 0.6299 | 1.0 | 0.039 | 21.8 | 16.6 | 6400 | 7800 | 0.25 |
| 6011 | 55 | 2.1654 | 90 | 3.5433 | 18 | 0.7087 | 1.1 | 0.043 | 28.3 | 21.2 | 5700 | 7000 | 0.362 |
| 6012 | 60 | 2.3622 | 95 | 3.7402 | 18 | 0.7087 | 1.1 | 0.043 | 29.5 | 23.2 | 5000 | 6300 | 0.385 |
| 6013 | 65 | 2.9551 | 100 | 3.9370 | 18 | 0.7087 | 1.1 | 0.043 | 31.9 | 25 | 4800 | 6100 | 0.44 |
| 6014 | 70 | 2.7559 | 110 | 4.3307 | 20 | 0.7874 | 1.1 | 0.043 | 39.7 | 31 | 4600 | 5800 | 0.6 |
| 6015 | 75 | 2.9528 | 115 | 4.5276 | 20 | 0.7874 | 1.1 | 0.043 | 41.6 | 33.5 | 4400 | 5600 | 0.64 |
Applications:
Customization:
Product Customization Services for 6000 Series Bearing:
Brand Name: BUGAO/NBKT
Model Number: 608, 6000, 6001, 6002, 6003, 6004, 6005
Place Of Origin: Ningbo, China
Certification: ISO9001:2015
Minimum Order Quantity: 1000 Pcs
Price: Negotiable
Packaging Details: Single Packing, Industrial Packing/Tube Packing
Delivery Time: 20 - 30 Days
Payment Terms: 30% Deposit, 70% Before Shipment
Supply Ability: 30,000,000
Cage Type: Steel
Number Of Rows: Single Row
Series: 6000 Series Bearing
Seal Type: Open, ZZ, RZ, 2RS
Material: Chrome Steel, Stainless Steel
Keywords: Bearing Auto Parts, Factory Bearing Price, Single Row Ball Bearing
Packing and Shipping:
Product Packaging for 6000 Series Bearing:
The 6000 Series Bearing is carefully packaged in a sturdy cardboard box to ensure safe transportation and handling.
Shipping Information:
We offer secure shipping options for the 6000 Series Bearing, with each product being packed and sealed to prevent any damage during transit.
Other Technical Data of Ball Bearings
ABEC-1 Tolerance Class ABEC-1 (P0)
| Inner Ring | Tolerance in um/s |
| d mm | Δdmp | 9 | Vdp²)0,1 Diameter Series | 2,3,4 | Vdmp | Kia | ΔBs | Vbs |
| over | including | high | low | max | max | max | high | low | max |
| 1)0.6 | 2.5 | 0 | -8 | 10 | 8 | 6 | 6 | 10 | 0 | -40 | 12 |
| 2.5 | 10 | 0 | -8 | 10 | 8 | 6 | 6 | 10 | 0 | -120 | 15 |
| 10 | 18 | 0 | -8 | 10 | 8 | 6 | 6 | 10 | 0 | -120 | 20 |
| 18 | 30 | 0 | -10 | 13 | 10 | 8 | 8 | 13 | 0 | -120 | 20 |
| 30 | 50 | 0 | -12 | 15 | 12 | 9 | 9 | 15 | 0 | -120 | 20 |
| 50 | 80 | 0 | -15 | 19 | 19 | 11 | 11 | 20 | 0 | -150 | 25 |
| Outer Ring | Tolerance in um/s |
| D mm | Δdmp | VDp2)4)Open Bearings Diameter Series | Capped Bearings2)3) | Vdmp | Kia | ΔBs | Vbs |
| 9 | 0,1 | 2,3,4 | 2,3,4 |
| over | including | high | low | max | max | max | high | low | max |
| 1)2.5 | 6 | 0 | -8 | 10 | 8 | 6 | 10 | 6 | 15 | Identical to ΔBs and VBs of inner ring of same bearing |
| 6 | 18 | 0 | -8 | 10 | 8 | 6 | 10 | 6 | 15 |
| 18 | 30 | 0 | -9 | 12 | 9 | 7 | 12 | 7 | 15 |
| 30 | 50 | 0 | -11 | 14 | 11 | 8 | 16 | 8 | 20 |
| 50 | 80 | 0 | -13 | 16 | 13 | 10 | 20 | 10 | 25 |
| 80 | 120 | 0 | -15 | 19 | 19 | 11 | 26 | 11 | 35 |
| 120 | 150 | 0 | -18 | 23 | 23 | 14 | 30 | 14 | 40 |
ABEC-3 Tolerance Class ABEC-3 (P6)
| Inner Ring | Tolerance in um/s |
| d mm | Δdmp | 9 | Vdp²)0,1 Diameter Series | 2,3,4 | Vdmp | Kia | ΔBs | Vbs |
| over | including | high | low | max | max | max | high | low | max |
| 11)0.6 | 2.5 | 0 | -7 | 9 | 7 | 5 | 5 | 5 | 0 | -40 | 12 |
| 2.5 | 10 | 0 | -7 | 9 | 7 | 5 | 5 | 6 | 0 | -120 | 15 |
| 10 | 18 | 0 | -7 | 9 | 7 | 5 | 5 | 7 | 0 | -120 | 20 |
| 18 | 30 | 0 | -8 | 10 | 8 | 6 | 6 | 8 | 0 | -120 | 20 |
| 30 | 50 | 0 | -10 | 13 | 10 | 8 | 8 | 10 | 0 | -120 | 20 |
| 50 | 80 | 0 | -12 | 15 | 15 | 9 | 9 | 10 | 0 | -150 | 25 |
| Outer Ring | Tolerance in um/s |
| D mm | Δdmp | VDp2)4)Open Bearings Diameter Series | Capped Bearings2)3) | Vdmp | Kia | ΔBs | Vbs |
| 9 | 0,1 | 2,3,4 | 2,3,4 |
| over | including | high | low | max | max | max | high | low | max |
| 1)2.5 | 6 | 0 | -7 | 9 | 7 | 5 | 9 | 5 | 8 | Identical to ΔBs and VBs of inner ring of same bearing |
| 6 | 18 | 0 | -7 | 9 | 7 | 5 | 9 | 5 | 8 |
| 18 | 30 | 0 | -8 | 10 | 8 | 6 | 10 | 6 | 9 |
| 30 | 50 | 0 | -9 | 11 | 9 | 7 | 13 | 7 | 10 |
| 50 | 80 | 0 | -11 | 14 | 11 | 8 | 16 | 8 | 13 |
| 80 | 120 | 0 | -13 | 16 | 16 | 10 | 20 | 10 | 18 |
| 120 | 150 | 0 | -15 | 19 | 19 | 11 | 25 | 11 | 20 |
ABEC-5 Tolerance Class ABEC-5 (P5)
| Inner Ring | Tolerance in um/s |
| d mm | Δdmp | Vdp²)Diameter Series | Vdmp | Kia | Sd | Sis3) | ΔBs | Vbs |
| 9 | 0,1,2,3,4 |
| over | including | high | low | max | 3 | max | max | max | High | Low | max |
| 1)0.6 | 2.5 | 0 | -5 | 5 | 4 | 3 | 4 | 7 | 7 | 0 | -40 | 5 |
| 2.5 | 10 | 0 | -5 | 5 | 4 | 3 | 4 | 7 | 7 | 0 | -40 | 5 |
| 10 | 18 | 0 | -5 | 5 | 4 | 3 | 4 | 7 | 7 | 0 | -80 | 5 |
| 18 | 30 | 0 | -6 | 6 | 5 | 3 | 4 | 8 | 8 | 0 | -120 | 5 |
| 30 | 50 | 0 | -8 | 8 | 6 | 4 | 5 | 8 | 8 | 0 | -120 | 5 |
| 50 | 80 | 0 | -9 | 9 | 7 | 5 | 5 | 8 | 8 | 0 | -150 | 6 |
| Outer Ring | Tolerance in um/s |
| D mm | Δdmp | Vdp²)Diameter Series | Vdmp | Kia | SD4) SD15) | Sea4)5) | ΔBs | Vbs |
| 9 | 0,1,2,3,4 |
| over | including | high | low | max | | max | max | max | High | Low | max |
| 1)2.5 | 6 | 0 | -5 | 5 | 4 | 3 | 5 | 8 | 8 | | 5 |
| 6 | 18 | 0 | -5 | 5 | 4 | 3 | 5 | 8 | 8 | 5 |
| 18 | 30 | 0 | -6 | 6 | 5 | 3 | 6 | 8 | 8 | 5 |
| 30 | 50 | 0 | -7 | 7 | 5 | 4 | 7 | 8 | 8 | 5 |
| 50 | 80 | 0 | -9 | 9 | 7 | 5 | 8 | 8 | 10 | 6 |
| 80 | 120 | 0 | -10 | 10 | 8 | 5 | 10 | 9 | 11 | 8 |
| 120 | 150 | 0 | -11 | 11 | 8 | 6 | 11 | 10 | 13 | 8 |
ABEC-7 Tolerance Class ABEC-7 (P4)
| Inner Ring | Tolerance in um/s |
| d mm | Δdmp | Δds | Vdp²)Diameter Series | Vdmp | Kia | Sd | Sia | ΔBs | Vbs |
| 7,8,9 | 1,7,2,3,4 |
| over | including | high | low | high | low | max | max | max | max | max | High | low | Low | max |
| 1)0.6 | 2.5 | 0 | -4 | 0 | -4 | 4 | 3 | 2 | 2.5 | 3 | 3 | 0 | -40 | -40 | 2.5 |
| 2.5 | 10 | 0 | -4 | 0 | -4 | 4 | 3 | 2 | 2.5 | 3 | 3 | 0 | -40 | -40 | 2.5 |
| 10 | 18 | 0 | -4 | 0 | -4 | 4 | 3 | 2 | 2.5 | 3 | 3 | 0 | -80 | -80 | 2.5 |
| 18 | 30 | 0 | -5 | 0 | -5 | 5 | 4 | 2.5 | 3 | 4 | 4 | 0 | -120 | -120 | 2.5 |
| 30 | 50 | 0 | -6 | 0 | -5 | 6 | 4 | 3 | 4 | 4 | 4 | 0 | -120 | -120 | 3 |
| 50 | 80 | 0 | -7 | 0 | -5 | 7 | 5 | 3.5 | 4 | 5 | 5 | 0 | -150 | -150 | 4 |
| Outer Ring | Tolerance in um/s |
| D mm | Δdmp | Δds | Vdp²)Diameter Series | Vdmp | Kia | Sd | Sia | ΔBs | Vbs |
| 7,8,9 | 1,7,2,3,4 |
| over | including | high | low | high | low | max | max | max | max | max | High | low | max |
| 1)2.5 | 6 | 0 | -4 | 0 | -4 | 4 | 3 | 2 | 3 | 4 | 5 | Identical to ΔBs and VBs of inner ring of same bearing | 2.5 |
| 6 | 18 | 0 | -4 | 0 | -4 | 4 | 3 | 2 | 3 | 4 | 5 | 2.5 |
| 18 | 30 | 0 | -5 | 0 | -5 | 5 | 4 | 2.5 | 4 | 4 | 5 | 2.5 |
| 30 | 50 | 0 | -6 | 0 | -6 | 6 | 5 | 3 | 5 | 4 | 5 | 2.5 |
| 50 | 80 | 0 | -7 | 0 | -7 | 7 | 5 | 3.5 | 5 | 4 | 5 | 3 |
| 80 | 120 | 0 | -8 | 0 | -8 | 8 | 6 | 4 | 6 | 5 | 6 | 4 |
| 120 | 150 | 0 | -9 | 0 | -9 | 9 | 7 | 5 | 7 | 5 | 7 | 5 |
Tolerance Data for Vibration of Single Bearing
| D | V | V1 | V2 | V3 | V4 |
| mm | Low | Medium | High | Low | Medium | High | Low | Medium | High | Low | Medium | High | Low | Medium | High |
| 3,4 | 80 | 44 | 44 | 60 | 35 | 32 | 48 | 26 | 22 | 31 | 16 | 15 | 28 | 10 | 10 |
| 5,6 | 110 | 72 | 60 | 74 | 48 | 40 | 58 | 36 | 30 | 35 | 21 | 18 | 32 | 11 | 11 |
| 7,8,9 | 130 | 96 | 80 | 92 | 66 | 54 | 72 | 48 | 40 | 44 | 28 | 24 | 38 | 12 | 12 |
| 10,12 | 160 | 120 | 100 | 120 | 80 | 70 | 90 | 60 | 50 | 55 | 35 | 30 | 45 | 14 | 15 |
| 15 | 210 | 150 | 120 | 150 | 100 | 85 | 110 | 78 | 60 | 65 | 46 | 35 | 52 | 18 | 18 |
| 17 | 210 | 150 | 120 | 150 | 100 | 85 | 110 | 78 | 60 | 65 | 46 | 35 | 52 | 25 | 25 |
| 20 | 260 | 190 | 150 | 180 | 125 | 100 | 130 | 100 | 75 | 80 | 60 | 45 | 60 | 25 | 25 |
| 22,25 | 260 | 190 | 150 | 180 | 125 | 100 | 130 | 100 | 75 | 80 | 60 | 45 | 60 | 30 | 32 |
| 28 | 260 | 190 | 150 | 180 | 125 | 100 | 130 | 100 | 75 | 80 | 60 | 45 | 60 | 35 | 40 |
| 30,32 | 300 | 240 | 190 | 200 | 150 | 130 | 150 | 120 | 100 | 90 | 75 | 60 | 70 | 35 | 40 |
| 35 | 300 | 240 | 190 | 200 | 150 | 130 | 150 | 120 | 100 | 90 | 75 | 60 | 70 | 42 | 45 |
| 40 | 360 | 300 | 260 | 240 | 180 | 160 | 180 | 150 | 130 | 110 | 90 | 80 | 82 | 50 | 50 |
| 45 | 360 | 300 | 260 | 240 | 180 | 160 | 180 | 150 | 130 | 110 | 90 | 80 | 82 | 60 | 60 |
| 50 | 420 | 320 | 320 | 280 | 200 | 200 | 210 | 160 | 160 | 125 | 100 | 100 | 95 | 70 | 70 |
Maximum Vibration Acceleration of Single Bearing
| D | Diameter Series(0) | Diameter Series(2) | Diameter Series(3) |
| mm | Z | Z1 | Z2 | Z3 | Z | Z1 | Z2 | Z3 | Z4 | Z | Z1 | Z2 | Z3 | Z4 |
| 3 | 35 | 34 | 32 | 28 | 36 | 35 | 32 | 30 | - | 37 | 36 | 33 | 31 | - |
| 4 | 35 | 34 | 32 | 28 | 36 | 35 | 32 | 30 | - | 37 | 36 | 33 | 31 | - |
| 5 | 37 | 36 | 34 | 30 | 38 | 37 | 34 | 32 | - | 39 | 37 | 35 | 33 | - |
| 6 | 37 | 36 | 34 | 30 | 38 | 37 | 34 | 32 | - | 39 | 37 | 35 | 33 | - |
| 7 | 39 | 38 | 35 | 31 | 40 | 38 | 36 | 34 | - | - | - | - | - | - |
| 8 | 39 | 38 | 35 | 31 | 40 | 38 | 36 | 34 | - | - | - | - | - | - |
| 9 | 41 | 40 | 36 | 32 | 42 | 40 | 37 | 35 | - | - | - | - | - | - |
| 10 | 43 | 42 | 38 | 33 | 44 | 42 | 39 | 35 | 30 | 37 | 44 | 40 | 37 | 32 |
| 12 | 44 | 43 | 39 | 34 | 45 | 43 | 39 | 35 | 30 | 47 | 45 | 40 | 37 | 32 |
| 15 | 45 | 44 | 40 | 35 | 46 | 44 | 41 | 36 | 31 | 48 | 46 | 42 | 38 | 33 |
| 17 | 46 | 44 | 40 | 35 | 47 | 45 | 41 | 36 | 31 | 49 | 47 | 42 | 38 | 33 |
| 20 | 47 | 45 | 41 | 36 | 48 | 46 | 42 | 38 | 33 | 50 | 48 | 43 | 39 | 34 |
| 22 | 47 | 45 | 41 | 36 | 48 | 46 | 42 | 38 | 33 | 50 | 48 | 43 | 39 | 34 |
| 25 | 48 | 46 | 42 | 38 | 49 | 47 | 43 | 40 | 36 | 51 | 49 | 44 | 41 | 37 |
| 28 | 49 | 47 | 43 | 39 | 50 | 48 | 44 | 41 | 37 | 52 | 50 | 45 | 42 | 38 |
| 30 | 49 | 47 | 43 | 39 | 50 | 48 | 44 | 41 | 37 | 52 | 50 | 45 | 42 | 38 |
| 32 | 50 | 48 | 44 | 40 | 51 | 49 | 45 | 42 | 38 | 53 | 51 | 46 | 43 | 39 |
| 35 | 51 | 49 | 45 | 41 | 52 | 50 | 46 | 43 | 39 | 54 | 52 | 47 | 44 | 40 |
| 40 | 53 | 51 | 46 | 42 | 54 | 52 | 47 | 44 | 40 | 56 | 54 | 49 | 45 | 41 |
| 45 | 55 | 53 | 48 | 45 | 56 | 54 | 49 | 46 | 43 | 58 | 56 | 51 | 47 | 44 |
| 50 | 57 | 54 | 50 | 47 | 58 | 55 | 51 | 48 | 45 | 60 | 57 | 53 | 49 | 46 |
| 55 | 59 | 56 | 52 | 49 | 60 | 57 | 53 | 50 | 47 | 62 | 59 | 54 | 51 | 48 |
| 60 | 61 | 58 | 54 | 51 | 62 | 59 | 54 | 51 | 48 | | 61 | 56 | 53 | 50 |
